• Wrenn Daniel posted an update 1 week, 3 days ago

    A decorative molding serves as a any continuous projection utilized to improve the appearance of a wall. In ancient Greece, we were holding first accustomed to throw water away from the wall. The contours, measurements, and projections of moldings vary greatly.

    Frieze

    One kind of molding – the frieze (or frieze board) – was initially suited for the Parthenon with the Acropolis. The frieze is considered element of the Greek architectural style.

    The Parthenon was built for the goddess Athena. The frieze moldings that were used were meant to tell the storyplot of her conquer Poseidon in becoming the patron with the ancient city which can be now Athens.

    The frieze panels certainly are a group of designed pediments which are full of the pictures of Athena’s birth and rise to power. Today, a frieze board will be the lcd just below a crown molding or cornice. Often, low relief is applied to the panel with regard to added decoration.

    Today, frieze moldings are most typical as a area of a decorative molding that follows the neoclassical architecture or decorating style.

    You will need a pretty high ceiling (minimum of 9 feet), and it’s recommended that you paint or stain the frieze and the crown molding exactly the same color. The frieze is an excellent approach to visually bring the ceiling down making the room appear cozier.

    Crown Molding

    Crown molding is among the most popular kind of cornice molding. Crown molding can be quite a single-piece of decorative molding, installed at the top of a wall, within an angle for the adjoining ceiling. However, I’ve come across crown molding assemblies of 5 or more pieces in many elaborate settings.

    Crown molding often features a profile that projects on the ceiling and along the wall, adding a refreshing appearance to some room. It is usually used on top of cabinets or built-in furniture.

    Introducing this type of decorative molding to a not at all hard room gives a historic character the room may not otherwise have. Crown molding can be used in combination with other moldings to add details to fireplace mantels and shelves. (For which it’s worth, this might be my favorite architectural feature).

    Crown molding is a way of Cornice Molding. The definition of "cornice" describes molding installed along the top of a wall or over from the. Once this treatment solutions are made out of multiple pieces of molding, stage system a "build-up cornice." One other kind of cornice molding may be the Cove Molding.

    Cove Molding

    Cove molding is incredibly just like crown molding, with similar application and performance. The gap between the two is incorporated in the profile. Cove molding includes a concave profile (which bows inward) while crown molding includes a convex (outward) profile.

    While crown is most in your house in traditional settings, Cove moldings are equally comfortable in country, or perhaps contemporary settings. You never normally see multi-piece assemblies of cove moldings. It is possible to occasionally notice "beaded" at upper and lower for the little accent.

    Entries, formal areas, formal dining rooms, and master bedrooms usually receive decorative moldings with ornate or traditional patterns.

    Kitchens as well as other more functional areas of your home could be in places you will quickly realize the greater design of the cove molding. Through the years, coves and crowns have become much smaller, but most still bear the shapes and styles from the original Greek and Roman designers.

    Chair Rail Molding

    A seat rail can be a decorative molding that divides a wall horizontally, usually about 32" to 36" higher than the floor. They protect the walls in locations damage might occur from people arising beyond chairs.

    That is why, the greater traditional chair rails will have a nosing in the center, with curved and beveled surfaces that taper to the wall above and underneath the nosing.

    Today, chair rails remain a typical detail in traditional interiors. They serve the decorating effect of unifying various architectural specifics of a space, such as window and door trim, and fireplace surrounds.

    Chair rail could also be used as being a cap for wainscoting or other wood paneling. This decorative molding adds feeling of detail and charm while achieving continuity inside a room by unifying the various decorative elements.

    Panel Molding

    Panel molding, commonly referred to as a picture frame molding, seems like a big empty frame, and it is often a part of designs on walls of old Colonial and, Georgian, and Early American homes. The location of the molding must be higher than the chair rail height contributing to Ten to twelve inches down from the ceiling.

    The size of such a decorative molding, measuring 1" to 3" wide, must be proportionate on the ceiling height from the room. Just like the other moldings, panel molding adds feeling of charm and delicate detail to a room.

    Wall framing appears with the Georgian amount of American architecture, when plaster did start to replace wood panels about the walls. Panel molding is also a fantastic way to divide walls into large, great looking units, without the same tariff of full wall paneling.

    Another use of this versatile molding is to trim openings created by wider planks which are assembled as rails and fashoins. Often, the centers of those frames are left open. Through the use of panel moldings throughout the perimeter in the opening, you create the appearance of images frame.

    When this decorative molding is painted in the same color because the surrounding walls, you accomplish a sculptural quality to some wall, adding texture and shadows. If moldings are painted in contrasting colors, they can build a striking animations appearance, giving depth and dimension. Such a treatment solutions are popular for staircases and entries.

    Baseboard & Base Molding

    Baseboard molding protects the foot of the wall from ware and tear, while hiding openings and other irregularities the location where the wall meets the bottom. Base moldings supply the floor line an increased profile, and could be as elaborate or simple as you desire.

    Whereas it’s not too difficult to setup chair rail with a level plane, baseboard (like crown) could be tricky if the floors (or ceilings) aren’t level. For that reason, I suggest finding a professional woodworker for that installing of these moldings.

    As one remedy to uneven floors, you can purchase a "shoe molding" down the bottom front edge to obtain the baseboard a finished look. Another thing you’re able to do with baseboard (in addition to using the toe kick of your cabinets) is incorporate accent lighting.

    This isn’t in keeping with the pure traditionalist, but it is a reasonably nifty way to have accent lighting across the perimeter of your room. You could not make this happen until they come up with small LED rope lights these days.

    Rope lights are available in different lengths and colors, and is easily installed behind baseboard. Simply make a notch inside the back side from the baseboard, at the very top, and run the rope lights into the notch.

    That is often used in commercial spaces, but has become added entries and hallways – especially in contemporary homes.

    Flexible Moldings

    If you have a curved wall or arch, you can sure enough have an excellent craftsman develop a curved molding for approximately 3 x the expense of a straight molding. Or, you can get a flexible molding for around the same price because straight one.

    These permit you to install moldings onto curved surfaces or arches, with no delay and expense of getting them to made out of wood. The stock profiles (there are hundreds) are the same on the rigid versions and they are generally compatible as far as paint finish can be involved.

    More details about phao chi pu please visit web page:
    check here.